# packages

pkgId: 87ad3d7bdb717c63880c22e22bb0eacaa267c595b05172286d37a4e36e0d7416
name: afio
arch: i586
version: 2.4.7
epoch: 0
release: 1
summary: Archiver program which writes cpio-format archives
rpm_license: LGPL
rpm_group: Archiving/Backup
rpm_buildhost: suse101
rpm_sourcerpm: afio-2.4.7-1.src.rpm
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: afio-2.4.7-1.i586.rpm
checksum_type: sha256
description:
  Afio makes cpio-format archives. It deals somewhat gracefully with input
  data corruption, supports multi-volume archives during interactive
  operation, and can make compressed archives that are much safer than
  compressed tar or cpio archives. Afio is best used as an `archive engine'
  in a backup script.


pkgId: 02484b63600fbc07856a47bdd0b822351fa9d11637197844cd057d65620e56df
name: linuxcoe-sd-base
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-base-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-base-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.


pkgId: 3b8b1cdb5b5f7a4bcda51b6f0e364250f857f4e1c8b1f6a1b36dfd9164f33db7
name: linuxcoe-sd-data-centos
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- CentOS Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-centos-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-centos-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds CentOS support as an overlay to LinuxCOE SystemDesigner


pkgId: 4d6d3c0c848143e595ea10dc9d45ab2ff617cc362da2aa07cc7da1b001241794
name: linuxcoe-sd-data-debian
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- Debian Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-debian-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-debian-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds Debian support as an overlay to LinuxCOE SystemDesigner


pkgId: 85a847db752f772f9501bf31c2a5efa0eb3ee8f74656d2ce4b79b2569da4ed5f
name: linuxcoe-sd-data-fedora
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- Fedora Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-fedora-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-fedora-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds Fedora support as an overlay to LinuxCOE SystemDesigner


pkgId: d50cb6822ec0dbf5c8b30e38979a0a224525f4605593035548e9733aba32ba46
name: linuxcoe-sd-data-nld
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- NLD Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-nld-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-nld-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds NLD support as an overlay to LinuxCOE SystemDesigner


pkgId: 27229c586eca6b456e077f350ccf89f0279f9d4a66c1f477edf17044503ef94d
name: linuxcoe-sd-data-opensuse
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- OpenSuSE Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-opensuse-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-opensuse-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds OpenSuSE support as an overlay to LinuxCOE SystemDesigner


pkgId: f8f8ba144a1393209e89b15e663093ffec0929f180cdc420ac9528907b074de2
name: linuxcoe-sd-data-rhel
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- RHEL Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-rhel-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-rhel-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds RHEL support as an overlay to LinuxCOE SystemDesigner


pkgId: 0c814918707c16bf36fb513364b6ff845c4ee7ec2dae7dbbfc76d9aeae66e728
name: linuxcoe-sd-data-scientific
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- Scientific Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-scientific-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-scientific-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds Scientific support as an overlay to LinuxCOE SystemDesigner


pkgId: f069f070d40a1c21b2545a9e453da3567252f64b66eb7711ce83810ddf4b937f
name: linuxcoe-sd-data-sles
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- SLES Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-sles-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-sles-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds SLES support as an overlay to LinuxCOE SystemDesigner


pkgId: 27e9f3d78ca5b05bf9501b7c274d7890cc999577b164f2f815aa485ccca9e29d
name: linuxcoe-sd-data-suse
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- SuSE Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-suse-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-suse-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds SuSE support as an overlay to LinuxCOE SystemDesigner


pkgId: fe1bd416d298db624fbabc3131c0601c662306ea6cd75b44df3b085aabb8c778
name: linuxcoe-sd-data-ubuntu
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner web interface -- Ubuntu Overlay
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-data-ubuntu-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-data-ubuntu-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package adds Ubuntu support as an overlay to LinuxCOE SystemDesigner


pkgId: 9047c6b56e4eb5d6f33324ec39a79b6395b022555e51ce4adf4c8d8c95e3701a
name: linuxcoe-sd-docs
arch: noarch
version: 4.1
epoch: 0
release: 1.suse10.1
summary: LinuxCOE SystemDesigner documentation
url: http://linuxcoe.sourceforge.net/
rpm_license: GPL
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux.site
rpm_sourcerpm: linuxcoe-sd-docs-4.1-1.suse10.1.src.rpm
rpm_packager: Louis Bouchard and Bruno Cornec <bruno@project-builder.org>
location_href: linuxcoe-sd-docs-4.1-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  LinuxCOE SystemDesigner is a unifying web application that allows
  a user to repeatably install, configure, and maintain different
  Linux system installations. It's CGI-based interface provides means
  to generate boot images for network or local media based installations,
  save profiles that store custom installation preferences for later re-use,
  and retrofit already deployed systems by overlaying other value-add components.

  This package provides the documentation for the SystemDesigner web application.


pkgId: 068bf38a42c8a06c8c0314973620a8ca19b3dc131e0a638942759ff357887fa1
name: mindi
arch: i586
version: 1.0.8
epoch: 0
release: 2.suse10.1
summary: Mindi creates emergency boot disks/CDs using your kernel, tools and modules
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: suse101
rpm_sourcerpm: mindi-1.0.8-2.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-1.0.8-2.suse10.1.i586.rpm
checksum_type: sha256
description:
  Mindi takes your kernel, modules, tools and libraries, and puts them on N
  bootable disks (or 1 bootable CD image). You may then boot from the disks/CD
  and do system maintenance - e.g.  partitions, backup/restore data,
  verify packages, etc.


pkgId: 2900bb7196566b74e2afdce83b118254f64c565cafeec6d1a8988eb823433cc5
name: mindi
arch: i586
version: 1.2.2
epoch: 0
release: 1.suse10.1
summary: Mindi creates emergency boot disks/CDs using your kernel, tools and modules
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux.site
rpm_sourcerpm: mindi-1.2.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bcornec@mondorescue.org>
location_href: mindi-1.2.2-1.suse10.1.i586.rpm
checksum_type: sha256
description:
  Mindi takes your kernel, modules, tools and libraries, and puts them on N
  bootable disks (or 1 bootable CD image). You may then boot from the disks/CD
  and do system maintenance - e.g. format partitions, backup/restore data,
  verify packages, etc.


pkgId: 89e4bf860915f4d4cb1ab7c075fb619bc1e1fad95a5f20b9915c85e63133832b
name: mindi
arch: i586
version: 2.1.2
epoch: 0
release: 1.suse10.1
summary: Mindi creates emergency boot disks/CDs using your kernel, tools and modules
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux.site
rpm_sourcerpm: mindi-2.1.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-2.1.2-1.suse10.1.i586.rpm
checksum_type: sha256
description:
  Mindi takes your kernel, modules, tools and libraries, and puts them on N
  bootable disks (or 1 bootable CD image). You may then boot from the disks/CD
  and do system maintenance - e.g. format partitions, backup/restore data,
  verify packages, etc.
  It is part of the MondoRescue suite for which it creates boot media.
  Homepage: http://www.mondorescue.org


pkgId: 78ffab2e6b980e84994b487bae4862b05e191945b9091ede6d12852c256c4f0b
name: mindi-busybox
arch: i586
version: 1.18.5
epoch: 0
release: 3.suse10.1
summary: Busybox version suited for Mindi
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux.site
rpm_sourcerpm: mindi-busybox-1.18.5-3.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-busybox-1.18.5-3.suse10.1.i586.rpm
checksum_type: sha256
description:
  This package provides a busybox version suited for Mindi.
  Mindi is a script to create boot/root disks based on your system.
  It uses Busybox during the restore process to provide a small Unix environement.
  This package prepares busybox the right way for mindi.
  Homepage: http://www.mondorescue.org


pkgId: 3c58257af966276f154bf944b0590457d17f68b88bf496fe085c92d6dd1651c1
name: mondo
arch: i586
version: 2.0.8
epoch: 0
release: 2.suse10.1
summary: A program which a Linux user can utilize to create a rescue/restore CD/tape
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: suse101
rpm_sourcerpm: mondo-2.0.8-2.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-2.0.8-2.suse10.1.i586.rpm
checksum_type: sha256
description:
  Mondo is a GPL disaster recovery solution to create backup media
  (CD, DVD, tape, network images) that can be used to redeploy the
  damaged system, as well as deploy similar or less similar systems.


pkgId: 753e4be451476c61832f1af853b3a0b72ec2e73310a1b1ecd27ea5e6133fdd30
name: mondo
arch: i586
version: 3.0.2
epoch: 0
release: 1.suse10.1
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux.site
rpm_sourcerpm: mondo-3.0.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.2-1.suse10.1.i586.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution to create backup media
  (CD, DVD, tape, network images) that can be used to redeploy the
  damaged system, as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data [or as much as you
  want], from bare metal if necessary. MondoRescue is in use by numerous blue-chip
  enterprises and large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, JFS, XFS,
  ReiserFS, VFAT, and can support additional file systems easily. It supports
  adjustments in disk geometry, including migration from non-RAID to RAID. MondoRescue
  runs on all major Linux distributions and is getting better all the time. You
  may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 80af8c9d03676381a99f3fa2cdb131fc0c6e5370bdd9faecc6b790266068bcb9
name: newt
arch: i586
version: 0.52.2
epoch: 0
release: 1.2
summary: Nifty Erik's Windowing Toolkit
url: ftp://download.fedora.redhat.com/pub/fedora/linux/core/development/SRPMS/newt-0.52.2-6.src.rpm
rpm_license: GPL
rpm_vendor: openSUSE Build Service
rpm_group: System/Libraries
rpm_buildhost: build07
rpm_sourcerpm: newt-0.52.2-1.2.src.rpm
location_href: newt-0.52.2-1.2.i586.rpm
checksum_type: sha256
description:
  Newt is a programming library for color text-mode widget-based user
  interfaces.  Newt can be used to add stacked windows, entry widgets,
  check boxes, radio buttons, labels, plain text fields, scrollbars,
  etc., to text mode user interfaces.



  Authors:
  --------
      Erik Troan <ewt@redhat.com>


pkgId: a548e18c5751f0744dfbf5c77d0d3f54b6839ac5fb336984bd9c6e60c8da30f3
name: newt-devel
arch: i586
version: 0.52.2
epoch: 0
release: 1.2
summary: Development Kit for newt
url: ftp://download.fedora.redhat.com/pub/fedora/linux/core/development/SRPMS/newt-0.52.2-6.src.rpm
rpm_license: GPL
rpm_vendor: openSUSE Build Service
rpm_group: Development/Libraries/C and C++
rpm_buildhost: build07
rpm_sourcerpm: newt-0.52.2-1.2.src.rpm
location_href: newt-devel-0.52.2-1.2.i586.rpm
checksum_type: sha256
description:
  The newd package contains the header files and libraries necessary for
  developing applications which use newt.  Newt is a development library
  for text mode user interfaces.	Newt is based on the slang library.



  Authors:
  --------
      Erik Troan <ewt@redhat.com>


pkgId: d41f4066676c719b360e2166d5aa6e23f6fd7ee0b30efaeeb5abdcdc06783a5c
name: pbmkbm
arch: noarch
version: 0.12.2
epoch: 0
release: 1.suse10.1
summary: Project Builder Make Build Media helps providing Custom Bootable Media
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: pbmkbm-0.12.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: pbmkbm-0.12.2-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder Make Build Media aka pbmkbm helps producing
  Bootable media based on the local distribution
  or pointing to another distribution repository


pkgId: e27bc2de5c227ed02791f384441fcd8f15a521e986292d3c2834f1cb063f53a1
name: perl-ProjectBuilder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.suse10.1
summary: Perl module providing multi-OSes (Linux/Solaris/...) Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: perl-ProjectBuilder-0.12.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: perl-ProjectBuilder-0.12.2-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder is a perl module providing set of functions
  to help develop packages for projects and deal
  with different Operating systems (Linux distributions, Solaris, ...).
  It implements a Continuous Packaging approach.


pkgId: c9f71715a8f66cd8d7816eb11824a7b67f7c360b1bb8932d31441f4c00f7ef2c
name: perl-ProjectBuilder
arch: noarch
version: 0.9.1
epoch: 0
release: 1.suse10.1
url: http://trac.project-builder.org
rpm_license: GPL
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: perl-ProjectBuilder-0.9.1-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: perl-ProjectBuilder-0.9.1-1.suse10.1.noarch.rpm
checksum_type: sha256
summary:
  perl-ProjectBuilder is a set of functions to help develop perl projects and deal with Linux distributions

description:
  perl-ProjectBuilder is a set of functions to help develop perl projects and deal with Linux distributions.


pkgId: 74aad560628376f9b1257f463e788af953e925e066e55b4ff7c88f47cc696906
name: perl-ProjectBuilder
arch: noarch
version: 0.9.3
epoch: 0
release: 1.suse10.1
summary: Perl module providing support and deal with Linux distributions
url: http://trac.project-builder.org
rpm_license: GPL
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: perl-ProjectBuilder-0.9.3-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: perl-ProjectBuilder-0.9.3-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  perl-ProjectBuilder is a perl module providing set of functions
  to help develop perl projects and deal with Linux distributions.


pkgId: 0fed1437dffd723c193cfa91912978097ddd71e830639a98de7e5c4d922a6905
name: project-builder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.suse10.1
summary: Project Builder helps providing multi-OSes Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: project-builder-0.12.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-0.12.2-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder aka pb helps producing packages
  for multiple OSes (Linux distributions, Solaris, ...).
  It does that by minimizing
  the duplication of information required and
  a set a very simple configuration files.
  It implements a Continuous Packaging approach.


pkgId: 5b417d6f3726e13c5f4379c62278535d80775e004c007b70dd7a2c1bca22993a
name: project-builder
arch: noarch
version: 0.8.10
epoch: 0
release: 1.suse10.1
summary: Project Builder aka pb is a tool to produce packages for multiple distributions
url: http://trac.project-builder.org
rpm_license: GPL
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: project-builder-0.8.10-1.suse10.1.src.rpm
location_href: project-builder-0.8.10-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  Project Builder aka pb is a tool to produce packages for multiple
  distributions.
  It does that by minimizing the duplication of information required
  and a set a very simple configuration files.


pkgId: b6d4c92a47a0965ea1bb67a8edce76a9addc3373d53f28400f25081223220fc1
name: project-builder
arch: noarch
version: 0.9.3
epoch: 0
release: 1.suse10.1
summary: Project Builder aka pb is a tool to produce packages for multiple distributions
url: http://trac.project-builder.org
rpm_license: GPL
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: project-builder-0.9.3-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-0.9.3-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  Project Builder aka pb helps producing packages
  for multiple distributions. It does that by minimizing
  the duplication of information required and
  a set a very simple configuration files.


pkgId: ff5efbfbf77aebbcf9221941024a44dd603eb7a2ab76b503976635e771122a4d
name: project-builder-server
arch: noarch
version: 0.15.3
epoch: 0
release: 1.suse10.1
summary: Perl server providing a REST API for Project-Builder.org Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: Applications/Archiving
rpm_buildhost: linux
rpm_sourcerpm: project-builder-server-0.15.3-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-server-0.15.3-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  project-builder-server is a perl module providing a REST API
  to help using project-builder in a client server mode.


pkgId: 981fdec606b732900e83b2036dc8dd38ab67ed060c9b6d13a35178a3830434bf
name: rpmbootstrap
arch: noarch
version: 0.12.2
epoch: 0
release: 1.suse10.1
summary: Tool similar to debootstrap for RPM based distributions
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: Applications/Archiving
rpm_buildhost: linux.site
rpm_sourcerpm: rpmbootstrap-0.12.2-1.suse10.1.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: rpmbootstrap-0.12.2-1.suse10.1.noarch.rpm
checksum_type: sha256
description:
  It helps building a chrooted environment for RPM based distributions
  in a similar way as debootstrap for deb based distributions.


